Electronic Steering Column Lock Control Module -J764-, Replacing

The procedure for "replacing the electronic steering column lock control module" includes the following steps:

• If a new Electronic Steering Column Lock Control Module -J764- is being installed in the vehicle, then the Electronic Steering Column Lock Control Module -J764- must be coded.
• Then the Electronic Steering Column Lock Control Module -J764- must be adapted.

The procedure to "replace the electronic steering column lock control module" can only be performed with the Vehicle Diagnostic Tester in the "guided fault finding" function.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select Guided Fault Finding  .

-- Use the GO TO  button to select the "function/component selection" and the following menu options one after the other:

• Body
• Electrical Equipment
• 01 - OBD-capable systems
• 2B - Electronic Steering Column Lock
• Functions
• Replace the electronic steering column lock control module