Anti-Theft Immobilizer Control Module -J362- New Identity When Replacing All Components

Special tools and workshop equipment required 

• Vehicle Diagnostic Tester

All required steps necessary for new installation of all immobilizer components are performed by this program.

-- Connect Vehicle Diagnostic Tester.

-- In Vehicle Diagnostic Tester, select operating mode "Guided Fault Finding".

-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body
• Electrical Equipment
• 01 - On Board Diagnostic (OBD) capable systems
• Immobilizer IV download
• Anti-theft Immobilizer functions
• New identity