Ignition Key, Adapting
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
NOTE:
If new or additional ignition keys are required, they must be adapted to the immobilizer control module.
Adapting the ignition key to the Anti-theft immobilizer control module -J362- :
-- Connect Vehicle Diagnostic Tester.
-- In Vehicle Diagnostic Tester, select operating mode "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Electrical Equipment
- 01 - On Board Diagnostic (OBD) capable systems
- Immobilizer IV download
- Anti-theft Immobilizer functions
- Key, adapting