Special Tools

WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Dial Gauge (0-10 mm) VAS 6079
Engine Support Bridge 10 - 222 A
Adapter T10055/3
Drift VW 207 C
Kukko Support 21/2
Assembly Tool T10134
Tool Insert AF24 V.A.G 1332/11
Hose Clamps Up to 25 mm Dia. 3094
Drip Tray for VAS 6100 VAS 6208
Hose Clip Pliers VAS 6362
Measuring BarVW 382/7

Fig 1: Identifying Measuring Bar VW 382/7
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Magnetic Plate 50 mm Dia. VW 385/17

Fig 2: Identifying Final Measurement Plate VW385/17
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Locking Pin T10060 A

Fig 3: Identifying Locking Pin T10060 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Puller T10055

Fig 4: Identifying Puller T10055
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Centering Mandrel 3176

Fig 5: Identifying 3176 Centering Mandrel
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 6: Identifying Special Tools -- Crankshaft Seal, Ribbed Belt Side, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Seal Remover 3203
Counter Support 3415
Assembly Tool T10053
Torque Wrench (5-50 Nm) V.A.G 1331
Torque Wrench (40-200 Nm) V.A.G 1332