Oil pump, removing and installing

Removing 

• Remove oil pan and baffle plate. Refer to Oil pan, removing and installing  .

Fig 1: Identifying Oil Pump & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolt -2-.
• Pull off chain sprocket from oil pump shaft.
• Remove bolts -1- and -3- and remove oil pump.

Installing 

Install in reverse order and note the following:

• Install dowel sleeves into upper part of oil pump.

Installed position of oil pump shaft/chain sprocket: Can only be installed in one position

• Install oil pan and baffle plate. Refer to Oil pan, removing and installing  .