Fastener Tightening Specifications

Component

Fastener Size

ABS Wheel Speed Sensor to Wheel Bearing Housing Bolt

Brake Disc to Wheel Hub Bolt

Coupling Rod to Stabilizer Bar Nut ⁽¹⁾

Coupling Rod to Wheel Bearing Housing Nut ⁽¹⁾

Cover Plate to Wheel Bearing Housing Bolt

Left Rear Level Control System Sensor to Lower Transverse Link Bolt

Left Rear Level Control System Sensor to Subframe Bolt

Lower Transverse Link to Subframe Nut ⁽¹⁾, ⁽²⁾

M12 x 1.5

Lower Transverse Link to Wheel Bearing Housing ⁽¹⁾, ⁽²⁾

M12 x 1.5 x 75

90 + 90° turn

Shock Absorber to Body Mounting Bolt ⁽¹⁾

50 + 90° turn

Shock Absorber to Shock Absorber Nut ⁽¹⁾

M10 x 1.0

Shock Absorber to Wheel Bearing Housing Bolt

M14 x 1.5 x 70

180

Stabilizer Bar to Subframe Bolt ⁽¹⁾, ⁽²⁾, ⁽⁴⁾

25 + 90° turn

Subframe to Body Bolts ⁽¹⁾

M12 x 1.5 x 90

90 + 90° turn

Tie Rod to Wheel Bearing Housing Nut ⁽¹⁾, ⁽²⁾

M14 x 1.5

130 + 90° turn

Tie Rod to Subframe Nut ⁽¹⁾

M12 x 1.5

90 + 90° turn

Trailing Arm Mounting Bracket to Body Bolt ⁽¹⁾

50 + 90° turn

Trailing Arm to Mounting Bracket Bolt ⁽¹⁾

M12 x 1.5 x 80

90 + 90° turn

Trailing Arm to Wheel Bearing Housing Bolt ⁽¹⁾, ⁽³⁾

90 + 90° turn

Upper Transverse Link to Subframe Nut ⁽¹⁾, ⁽²⁾

M12 x 1.5

Upper Transverse Link to Wheel Bearing Housing Bolt ⁽¹⁾, ⁽²⁾

M14 x 1.5

130 + 90° turn

Wheel Hub with Wheel Bearing to Wheel Bearing Housing Bolt ⁽¹⁾

M16 x 1.5 x 70

180 + 180° turn

⁽¹⁾	Always replace after removal.

⁽²⁾	Always tighten threaded connections in curb weight position. Refer to REAR AXLE, LIFTING TO CURB WEIGHT POSITION .

⁽³⁾	Follow tightening sequence. Refer to Installing .

⁽⁴⁾	Tighten uniformly.