Wheel bearing housing to upper transverse link
- Use a new bolt and nut.
- Tighten in curb weight position.
|
130 Nm + 90° turn |
Wheel bearing housing to lower transverse link
- Use a new bolt and nut.
- Tighten in curb weight position.
|
90 Nm + 90° turn |
Wheel bearing housing to tie rod
- Use a new bolt and nut.
- Tighten in curb weight position.
|
130 Nm + 90° turn |
| Trailing arm to wheel bearing housing
|
90 Nm + 45° turn |
| Coupling rod to wheel bearing housing
|
45 Nm |
| Cover plate to wheel bearing housing |
12 Nm |
| ABS speed sensor to wheel bearing housing |
8 Nm |
| Shock absorber to wheel bearing housing. |
180 Nm |
| Brake disc to wheel bearing housing |
4 Nm |