Wheel Bearing And Wheel Hub: Removing

-- Raise the vehicle.

-- Remove wheel.

Loosen dust cap from seat by tapping lightly on claw of VW 637/2.

Fig 1: Identifying Hammer And Grease Cap Puller VW 637/2

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press off dust cap.

Fig 2: Identifying Grease Cap Puller VW 637/2 To Pull Off Dust Cap

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove brake carrier with brake caliper and hang on body with tie wire. Refer to Removal and Installation .

-- Remove the bolt and then remove the brake disc.

-- Remove multi-point socket head bolt using T10162.

-- Pull wheel hubs/wheel bearing unit off stub axle.