Remove Stabilizer From Subframe -11- And -16-

Fig 1: Locating Pins T10096 Installation Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove pendulum support from transmission, unscrew bolts -14- to do so.

-- Place the V.A.G 1383 A under the subframe.

Fig 2: Identifying Engine/Transmission Jack V.A.G 1383 A Placed Below Subframe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place for example a block of wood -1- between V.A.G 1383 A and subframe.

-- Loosen bolts -4- and -5- and slightly lower subframe with brackets. Observe electrical wires when doing this.

Fig 3: Locating Pins T10096 Installation Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Now lift stabilizer -1- toward front, over console -2- and down from subframe.

Fig 4: Identifying Lift Stabilizer Toward Front, Over Console And Down From Subframe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.