Front Safety Belt Height Adjuster

NOTE:

Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

-- Remove upper B-pillar trim. Refer to UPPER B-PILLAR TRIM .

NOTE:

Belt anchor or anchor rail does not need to be removed on seat belt.

-- Remove bolt -1- (40 Nm) and remove belt relay -2- from belt height adjuster.

-- Remove bolt -3- (20 Nm) and separate belt height adjuster -4- from mounting in carrier plate.

Fig 1: Identifying Front Seatbelt Height Adjuster Removing/Installing Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installation

-- To install, perform the steps used for removal in reverse order.