Belt Webbing, Checking

-- Pull belt webbing completely off automatic belt retractor.

-- Check belt webbing for soiling, wash with mild soap solution if necessary.

• If one of the types of damage (point 1 or 2) shown in the following is detected on a vehicle which has been in an accident - seat belt must be replaced completely with seat belt latch and belt height adjuster.
• If one kind of damage under points 1, 2, 3 or 4 is detected on a vehicle which has not been in an accident, only the damaged seat belt needs to be replaced.
• Belt webbing cut, torn or chafed.
  Fig 1: Identifying Belt Webbing Cut, Torn Or Chafed

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Webbing loops on belt edge torn.
  Fig 2: Identifying Belt Webbing - Webbing Loops On Belt Edge Torn

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Burn marks from cigarettes or similar.
  Fig 3: Identifying Burn Marks From Cigarettes Or Similar

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• One side of belt edge deformed or area of belt edge is wavy.
  Fig 4: Identifying Belt Edge Deformed On One Side And/Or Belt Edge Area Is Wavy

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.