Service Interval Display, Resetting

Service interval display must be reset at

• Vehicle release inspection
• Every service

(adapted)!

-- Connect the diagnostic tester. Refer to VEHICLE TESTER, CONNECTING .

-- Switch the ignition on.

-- Touch button/field on screen: GUIDED FUNCTIONS  .

If the displays indicated in the procedure are not shown on the display. Refer to Operating instructions for Vehicle Diagnosis, Testing and Information System 5051 or Vehicle Diagnosis & Service Syst. VAS 5052.

-- Press the >  button to confirm.

-- Select in succession:

• Brand
• Type
• Model year
• Engine Code

-- Confirm vehicle identification.

-- Select in succession:

• "Instrument cluster" -arrow-.
  Fig 1: Identifying "Instrument Cluster" Selection On Scan Tool

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• "Rest service interval display".

-- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".

End Adaptation 

Indicated on display:

-- Press the Go to  button -arrow- on display.

Indicated on display:

-- Press End  button -arrow- on display.

-- Press Exit  button in exit menu.

-- Turn off ignition and disconnect diagnostic connection.

-- Switch the ignition on.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.