LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (2.0L - Exhaust System, Emission Controls - Engine Code(S): CBEA & CJAA (Sedan) (A5 Platform)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Center Muffler Suspended Mount to Body Bolt 1, 4 - 23
Connecting Pipe to Exhaust Gas Recirculation Housing Bolt - 23
Control Line Bracket to Particulate Filter Bolt - 9
Control Line Bracket Nut - 23
Control Line to Exhaust Gas Recirculation Housing Fitting - 23
Control Line to Particulate Filter Fitting (5) - 45
Control Line to Particulate Filter with NOx Reduction Catalytic Converter Fitting (4) - 45
Exhaust Gas Recirculation Cooler to Exhaust Gas Recirculation Housing Bolt - 8
Exhaust Gas Recirculation Filter to Exhaust Gas Recirculation Housing Bolt - 23
Exhaust Gas Recirculation Filter to Particulate Filter with NOx Reduction Catalytic Converter Clamp 1, 4 - 3.5
Exhaust Gas Recirculation Filter to Particulate Filter Clamp 1, 5 - 3.5
Exhaust Gas Recirculation Filter to Turbocharger Stud Bolt Nut - 23
Exhaust Gas Recirculation Valve 2 to Exhaust Gas Recirculation Housing Bolt - 8
Exhaust Gas Recirculation Temperature Sensor to Exhaust Gas Recirculation Housing Bolt - 20
Exhaust Gas Temperature Sensors 2 and 3 to Particulate Filter (3) - 45
Exhaust Gas Temperature Sensor 4 to Particulate Filter with NOx Reduction Catalytic Converter (3) - 45
Exhaust Pipe Suspended Mount to Body Bolt 1, 5 - 23
Exhaust Pressure Sensor 1 to Auxiliary Fuel Pump Bracket - 4
Exhaust Pressure Sensor 2 Bolt (2)
  - 4
- 8
Front Muffler to Rear Muffler Clamping Sleeve Nut - 23
NOx Reduction Catalytic Converter to Exhaust Flap Control Module Clamp 1, 5 - 7
NOx Reduction Catalytic Converter to Front Muffler Clamping Sleeve Nut - 23
Oxygen Sensor - 52
Particulate Filter Bracket to Cylinder Block Nut - 25
Particulate Filter Bracket to Particulate Filter/Cylinder Head Bolt/Nut - 23
Particulate Filter to NOx Reduction Catalytic Converter Clamp 1, 5 - 7
Particulate Filter to Particulate Filter Bracket Nut - 23
Particulate Filter with NOx Reduction Catalytic Converter to Exhaust Door Control Unit Clamp 1, 4 - 7
Rear Muffler Suspended Mount to Body Bolt - 23
Shield to Particulate Filter Bolt - 10
Suspended Mount to Subframe Bolt - 25
Tunnel Bridge to Body Nut - 23
Turbocharger to Particulate Filter Clamp (1) - 7
(1) Always replace
(2) For bolt clarification, see -items 3 and 4- in one of the following: engine code CBEA, refer to PARTICULATE FILTER WITH NOX REDUCTION CATALYTIC CONVERTER OVERVIEW  or engine code CJAA, refer to PARTICULATE FILTER WITH NOX REDUCTION CATALYTIC CONVERTER OVERVIEW 
(3) Coat only the threads with hot bolt pasteG 052 112 A3
(4) Engine code CBEA
(5) Engine code CJAA
scientia non olet · About LEMON Manuals