LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (2.0L - Exhaust System, Emission Controls - Engine Code(S): AXX, BPY & BWA (A5 Platform)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Volkswagen Jetta, 2008 Volkswagen GLI, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Catalytic Converter to Exhaust Manifold/Turbocharger Nut (1), (2) - 40
Clamping Sleeve Nut - 25
Crossmember to Underbody Nut - 25
Oxygen Sensor (3) - 55
Suspended Mount Bolt - 25
(1) Always replace
(2) Coat the stud bolts on the exhaust manifold with hot bolt paste
(3) Only use hot bolt paste to grease the threads; do not let the paste get onto the slits in the oxygen sensor body