LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (2.5L - Exhaust System, Emission Controls - Engine Code(S): BGP, BGQ, CBTA & CBUA (Sedan) (A5 Platform)) >> 26 Exhaust System, Emission Controls >> General Information >> Secondary Air Injection System

Secondary Air Injection System

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

  • Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.
  • To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

Function 

Air is blown briefly into the exhaust valves by the Secondary Air Injection (AIR) system during a cold start. This produces an oxygen rich exhaust gas, causes after burning and reduces the heating-up phase of the catalytic converter.