Muffler And Mounts Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- from the Front Exhaust Pipe with Catalytic Converter
- Bolt
- 26 Nm
- Always replace.
- For attaching the fuel tank.
- Suspended Mount
- Bolt
- 23 Nm
- Center Muffler
- Factory installed with the rear muffler as one unit. If repair is necessary, replace separately.
- Install the exhaust system free of stress. Refer to EXHAUST SYSTEM, INSTALLING .
- Separating the exhaust system, refer to MIDDLE AND REAR MUFFLERS, SEPARATING AND CONNECTING .
- Retaining Loop
- Replace if damaged.
- Rear Muffler
- Original equipment as one unit with the center muffler. If repair is necessary, replace separately.
- Install the exhaust system free of stress. Refer to EXHAUST SYSTEM, INSTALLING .
- Separating the exhaust system. Refer to MIDDLE AND REAR MUFFLERS, SEPARATING AND CONNECTING .
- Nut
- 23 Nm
- Repair Clamp
- For individual replacement of the center and rear mufflers.
- Installed location, refer to MIDDLE AND REAR MUFFLERS, SEPARATING AND CONNECTING .
- Tighten the nuts evenly.
- Suspended Mount
- Replace if damaged.
- Bolt
- 23 Nm
- Nut
- 20 Nm
- Rear Crossmember
- Front Muffler
- From MY 06.