Transmission, Transporting

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig 3336

-- Install the 3336 to the clutch housing.

Fig 1: Identifying Transmission Support Jig 3336 Secured To Clutch Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the support arm on the sliding bar using the locking bolt -arrow-.

Fig 2: Identifying Support Arm Adjusted On Sliding Piece With Locking Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Number of visible holes = 5.

-- Lift the transmission using a workshop crane and the 3336.

-- Set the transmission down, for example, into the transport container.