Installing The Cable Retainer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Direction To Press On Cable Retainer

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The relay lever is removed.
The cable retainer may only be installed at the bushing -arrow-.
The cable retainer must move freely on the relay lever.
It must be behind the tab -arrow 2-.

Fig 2: Identifying Plastic Relay Lever With Tab -Arrow 1-
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.