LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission Housing And Clutch Housing >> Installing The Sleeve And Seal

Installing The Sleeve And Seal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spindle And Nut To Pull Sleeve And Seal
GWWN34-1700Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the seal seat inside the transmission.

-- Attach the spindle -A- on the 3066 into the threaded piece on the differential.

-- Turn the nut -B- and pull the sleeve all the way over the T10148.

NOTE:

If the transmission is disassembled, press the sleeve in onto the stop using the T10148.

scientia non olet · About LEMON Manuals