LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Removing The Angular Contact Ball Bearing

Removing The Angular Contact Ball Bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Angular Contact Ball Bearing
GWWV34-2025Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Be careful not to bend the shift forks when removing and installing the angular contact ball bearing.

scientia non olet · About LEMON Manuals