LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Installing The Lock Washer

Installing The Lock Washer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Socket Driver & Jaw Protectors
GWWV34-2024Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the lock washer in the groove in the shift segment using a socket wrench

NOTE:

The shift segment must still rotate easily after the lock washer is installed.

A - 10 mm socket wrench

B - Protective jaws

scientia non olet · About LEMON Manuals