LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Disassembly And Assembly >> Shift Forks >> Installing The Angular Contact Ball Bearing Into The Shift Fork

Installing The Angular Contact Ball Bearing Into The Shift Fork

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Angular Contact Ball Bearing Pulled Into Selector Fork Up To Limit Stop
GWWN34-1703Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The depression inside the 3290/1 faces the ball bearing.

Fig 2: Identifying Allocation Shift Fork (Dimension)
GWWV34-2031Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  Dimension -a- (mm)
1st/2nd gear selector fork 87.2 to 87.4
3rd/4th gear selector fork 93.6 to 93.8

Shift segment allocation, refer to SHIFT SEGMENT IDENTIFICATION .

scientia non olet · About LEMON Manuals