LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Lever And Housing, Through 10.06 >> Selector Cable And Shift Cable, Removing And Installing

Selector Cable And Shift Cable, Removing And Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal And Installation Of Selector Cable And Shift Cable
GWWN34-1367Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock washer from the shift cable -A- and the selector cable -B-.

Lift the tab with a screwdriver -arrow 1- and remove the lock washer -arrow 2-.

-- Remove the shift cable -A- from the shift lever mount.

-- Remove the selector cable -B- from the selector bracket mount.

scientia non olet · About LEMON Manuals