LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Controls, Housing - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 34 Controls, Housing >> Description And Operation >> Shift Mechanism Overviews >> Shift Lever And Housing, Through 10.06 >> Pressure Spring, Installing

Pressure Spring, Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spring Inserted So That Leg Contacts Upper Part Of Pin
GWWN34-1119Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the pressure spring so that the leg -A- contacts the upper part of the pin -arrow-.

-- Pull the leg -B- downward so that it reaches the bottom of the pin -arrow-.

scientia non olet · About LEMON Manuals