Tightening Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Clutch slave cylinder to transmission, see - item 9-.

Transmission shift lever to shift shaft, see - item 18- SHIFT AND SELECTOR CABLES .

Cable bracket to transmission, see - item 6- SHIFT AND SELECTOR CABLES .

Transmission support to transmission bracket and transmission:

Fig 1: Identifying Transmission Support And Slave Cylinder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the bolts.

-- Tighten all bolts hand tight.

-- Tighten the bolts to specification.

Bolts -arrows-

20 Nm + 90° (1/4) additional turn