LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2009 >> GLI 2.0 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Clutches - 0A4 (Sedan) (A5 Platform)) >> 30 Clutch >> Description And Operation >> Clutch Release Mechanism Overview >> Release Bearing

Release Bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Removing and Installing 

Fig 1: Identifying Retaining Tabs & Release Bearing
GWWA30-0068Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the tabs -arrows- together on the backside of the clutch release lever and remove the release bearing -A- out of the clutch release lever.

-- To install, press the release bearing -A- into the clutch release lever until the tabs -arrows- engage.

scientia non olet · About LEMON Manuals