Engine And Transmission Mount Overview

Fig 1: Identifying Assembly Overview: Engine And Transmission Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- Tightening specification, refer to one of the following:
  Refer to [For transmission(s) 02Q] Specifications .
  
  Refer to [For transmission(s) 02E] Specifications .
- For the transmission mount bracket to the transmission.
Bolt
- 50 Nm + 90° (1/4) additional turn.
  Always replace.
- For the pendulum support to the transmission.
Engine Mount Bracket
Bolt
- 40 Nm + 180° (1/2) additional turn.
  Always replace.
- For the engine mount bracket to the engine.
Engine Mount
Bolt
- 40 Nm + 90° (1/4) additional turn.
  Always replace.
- For the engine mount to the body.
Bracket
Bolt
- 20 Nm + 90° (1/4) turn.
  Always replace.
- For the bracket to the body.
Bolt
- 20 Nm + 90° (1/4) additional turn.
  Always replace.
- For the bracket to the engine mount.
Bolt
- 40 Nm + 90° (1/4) turn.
  Always replace.
- For the engine mount to the body.
Bolt
- 60 Nm + 90° (1/4) additional turn.
  Always replace.
- For the engine mount to the engine mount bracket.
Pendulum Support
- First, secure the pendulum support to the transmission, and then to the subframe.
Bolt
- 100 Nm + 90° (1/4) additional turn.
  Always replace.
- For the pendulum support to the subframe.
Bolt
- 60 Nm + 90° (1/4) additional turn.
  Always replace.
- For the transmission mount to the transmission mount bracket.
Bolt
- 40 Nm + 90° (1/4) additional turn.
  Always replace.
- For the transmission mount to the body.
Transmission Mount
- The graphic shows the Direct Shift Gearbox (DSG).
Bolt
- Tightening specification, refer to one of the following:
  Refer to [For transmission(s) 02Q] Specifications .
  
  Refer to [For transmission(s) 02E] Specifications .
- For the transmission support to the transmission.
Transmission Mount Bracket