Special Tools

Special Tools And Workshop Equipment Required 

• Straight Edge 500 mm VAS 6075
• Thrust Piece T10368
• Compression Tester V.A.G 1763
• Adapter V.A.G 1763/6
• Thrust Piece T10174
• Spark Plug Removal Tool 3122 B
• Valve Seal Removal Tool 3364
• Valve Stem Seal Driver 3365
• Adapter T40012
• Valve Cotters Asm/Disasm Device VAS 5161
• Guide Plate for FSI Engine VAS 5161/19B
• Dial Gauge Holder VW 387
  Fig 1: Identifying Dial Gauge Holder VW 387

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Dial Gauge 0-10 mm VAS 6079
  Fig 2: Identifying Dial Gauge VAS 6079

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench V.A.G 1783
  Fig 3: Identifying Torque Wrench V.A.G 1783

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Open End Spanner Insert AF 10 V.A.G 1783/1
  Fig 4: Identifying V.A.G 1783/1

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Thrust Piece T10354
  Fig 5: Identifying Thrust Piece T10354

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pulling Hook T20143
  Fig 6: Identifying Extractor Hook T20143

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller T10394
  Fig 7: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller T10055
  Fig 8: Identifying Puller T10055 With Adapter T10055/3

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 9: Identifying Engine Sling 2024 A And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required 

• Engine Sling 2024 A
• Engine Support T10014
• Assembly Tool T10352
• Counter Hold Tool T10355
• Locking Pin T40011
• Ignition Coil Puller T40039

Fig 10: Identifying Torque Wrench V.A.G 1331 And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required 

• Torque Wrench (5-50 Nm) V.A.G 1331
• Torque Wrench (40-200 Nm) V.A.G 1332
• Shop Crane-Load Cap = 700-1200 KG VAS 6100
• Engine Bung Set VAS 6122
• Drip Tray for VAS 6100 VAS 6208 or V.A.G 1306
• Polydrive Bit and Drive Socket T10070

Fig 11: Identifying Engine Support Bridge And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required 

• Engine Support Bridge 10-222 A
• Bracket with Spindle and Hook 10-222 A/10
• Shackle 10-222 A/12
• Adapter 10-222 A/13)
• Locking Pin T10060 A
• bits T10099