Vibration Damper Seal, Replacing

Special Tools And Workshop Equipment Required

Removing

-- Remove the vibration damper. Refer to VIBRATION DAMPER .

-- Install the thrust Piece T10368.

Fig 1: Identifying Vibration Damper Bolt And Thrust Piece T10368

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use the pulling Hook T20143 to remove the seal.

Installing

-- Clean the running and sealing surface.

-- Remove the thrust Piece T10368.

Fig 2: Identifying Vibration Damper Bolt And Thrust Piece T10368

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the seal -arrow- in using the thrust Piece T10354 and the vibration damper bolt.

Fig 3: Identifying Thrust Piece T10354

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Replace the vibration damper bolt and the O-ring -1-.

Fig 4: Identifying O-Ring And Tooth Contour

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Further installation is in the reverse order of removal.