Radiator, Fan Shroud And Coolant Fans Overview

Fig 1: Identifying Radiator And Coolant Fan Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Coolant Fan -V7- 
   • Removing and installing, refer to COOLANT FAN AND COOLANT FAN 2 .
2. Nut 
   • 10 Nm
3. Fan Shroud 
   • Removing and installing, refer to FAN SHROUD .
4. Lower Coolant Hose 
   • To the connection for the thermostat.
5. Retaining Clip 
   • Make sure it is secure.
6. Engine Coolant Temperature Sensor on Radiator -G83- 
   • With a O-ring.
   • Always replace the O-ring.
7. O-ring 
   • Replace if damaged.
8. Upper Coolant Hose 
   • From the coolant pump.
9. O-ring 
   • Replace if damaged.
10. Bolt 
    • 5 Nm
    • To the charge air cooler.
11. Radiator 
    • Removing and installing, refer to RADIATOR .
    • After replacing, replace the entire amount of coolant. Refer to DRAINING AND FILLING .
    • With engine code CBFA: Radiator identification sensor, refer to Fig 2.
12. Nut 
    • 10 Nm
13. Bolt 
    • 5 Nm
    • To the radiator.
14. Coolant Fan 2 -V177- 
    • Removing and installing, refer to COOLANT FAN AND COOLANT FAN 2 .

Fig 2: Identifying Radiator Identification Sensor G611 - Engine Code CBFA

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-Arrow- indicates the direction of travel

A - Radiator

B - Radiator identification sensor