Structure-Borne Sound Actuator -R214- AND Structure-Borne Sound Control Module -J869- OVERVIEW

The plenum chamber cover and bulkhead must be removed to remove and install. Refer to Description and Operation .

Fig 1: Identifying Assembly Overview: Structure-Borne Sound Actuator -R214- And Structure-Borne Sound Control Module -J869-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Structure-Borne Sound Control Module 
   • Installed location: In the plenum chamber.
   • Remove the plenum chamber cover and bulkhead to remove and install.
2. Bolt 
   • 8 Nm
3. Nut 
   • 8 Nm
4. Structure-Borne Sound Actuator Bracket 
5. Nut 
   • 15 Nm
6. Bolt 
   • 8 Nm
7. Bolt 
   • 8 Nm
8. Structure-Borne Sound Actuator 
   • Installed location: In the plenum chamber.
   • Remove the plenum chamber cover and bulkhead to remove and install.
9. Structure-Borne Sound Control Module Bracket 
10. Nut 
    • 8 Nm