Vehicle Diagnostic Tester, Golf My 98 Through 03, Connecting
CAUTION:
- Switch off the ignition and all electrical consumers.
- Apply parking brake.
-- In vehicles with automatic transmissions, move the selector lever to the "P" or "N" position.
-- In vehicles with manual transmissions, move the shift lever to the neutral position.
-- Remove the trim -1- in -direction of arrow-.
Fig 1: Identifying Tester VAS 5051 Connected To Data Link Connector Using Diagnosis Cable VAS 5051/1
-- With the ignition off, connect the Vehicle Diagnosis Tester to the diagnostic connection.
-- Switch on ignition.
NOTE:
The method for connecting all other Vehicle Diagnosis Testers can be derived from the sequence described above.