Wire Stripper Vas 1978/3

Wire Stripper VAS 1978/3 is used for professional stripping and cutting of wires.

Fig 1: Identifying Wire Stripper (VAS1978/3)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The VAS 1978/3 is a component of Wiring Harness Repair Set VAS 1978/Wiring Harness Repair Set VAS 1978A/Wiring Harness Repair Set VAS 1978B.

VAS 1978/3 has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping

-- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.

-- Insert wire end from front up to stop into jaws of pliers and squeeze the VAS 1978/3 completely.

Fig 2: Identifying Stripping Pliers To Strip Wiring Insulation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the VAS 1978/3 again and remove the stripped wire end.

-- If necessary, cut wires using side-cutter function on the top of the VAS 1978/3.

Fig 3: Cutting Wire

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.