FN 3 Front Brake Caliper Assembly Overview

• Install complete repair kit when servicing.
• Only use mineral spirits to clean brake parts.
• Apply thin coat of assembly paste -G 052 150 A2- to brake cylinders, pistons and seals.

Fig 1: Identifying FN 3 Front Brake Caliper Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. - Dust Cap 
   • Install onto bleeder valve.
2. - Bleeder Valve, 10 Nm 
   • Apply a thin coat of assembly paste -G 052 150 A2- to the threads before screwing in.
3. - Caps 
   • Insert in bushing.
4. - Guide Pins, 30 Nm 
5. - Bushing 
   • Insert in brake caliper.
6. - Brake Caliper 
7. - Brake Carrier 
   • Bolt to brake caliper.
8. - Retaining Spring 
   • Insert with both ends in holes of brake caliper.
9. - Seal 
   • Removal and installation, refer to FN 3 FRONT CALIPER PISTON .
10. - Pistons 
    • Removal and installation, refer to FN 3 FRONT CALIPER PISTON .
    • First apply thin coat of assembly paste -G 052 150 A2- on piston.
11. - Protective Cap 
    • Removal and installation, refer to FN 3 FRONT CALIPER PISTON .
    • Do not damage when installing piston.