Power Seat Trim, Left

NOTE:

Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.

Removal

-- Turn off the ignition.

-- Press clamping pin -1- inward and remove securing clip -2-.

-- Pull rear trim -3- outward and then swing trim downward -arrow A-.

-- Remove rear trim from seat.

-- Pull front trim -4- upward and then swing trim outward -arrow B-.

-- Push front trim toward rear -arrow C-.

-- Remove front trim from seat and disconnect wiring harnesses from switches -5-.

Fig 1: Identifying Left Power Seat Trim Remove/Install Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installation

-- To install, perform the steps used for removal in reverse order.