Left Seat Trim
NOTE:
Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.
Removal
-- Press metal tab of securing clip -2- inward using a small screwdriver and pull off handle -3- from adjustment lever -1-.
NOTE:
For clarity, securing clip is depicted as removed in the illustration.
-- Remove the clip -2- from adjusting lever -1-.
-- Using 3399, reach behind a locking mechanism of backrest adjusting wheel -4-.
-- Pry 3399 outward -arrow A- and remove backrest adjusting wheel from seat.
-- Press clamping pin -5- and remove the clip -6-.
-- Remove trim -7- in direction of travel out of mounts in seat frame.
Installation
-- To install, perform the steps used for removal in reverse order.