Windshield Wiper Blades, Adjusting Park Position

Special tools and workshop equipment required 

• Torque Wrench V.A.G 1331

Procedure 

-- Deactivate the APP function. Refer to WIPER MOTOR CONTROL MODULE -J400-, DEACTIVATING APP FUNCTION .

-- Let the wiper return to its park position and then turn off the ignition.

-- Adjust the wiper blade park position.

Driver Side 

Distance -A- between tips of wiper lips and upper edge of plenum chamber cover must be 10 mm (0.4 inch).

-- If necessary, adjust the windshield wiper blade park position by repositioning the wiper arm.

Wiper arms, removing, refer to WINDSHIELD WIPER ARMS .

-- Tighten the threaded connection to the tightening specification. Refer to WINDSHIELD WIPER SYSTEM OVERVIEW .

Passenger Side 

Distance -B- between tips of wiper lips and upper edge of plenum chamber cover must be 10 mm (0.4 inch).

-- If necessary, adjust the windshield wiper blade park position by repositioning the wiper arm.

Wiper arms, removing, refer to WINDSHIELD WIPER ARMS .

-- Tighten the threaded connection to the tightening specification. Refer to WINDSHIELD WIPER SYSTEM OVERVIEW .