Adjustment Overview

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If repairs have been performed on the transmission, it is only necessary to adjust the input shaft, output shaft or differential if components have been replaced which have a direct effect on the adjustment of the transmission. Refer to the table to avoid any unnecessary adjusting.

		to be adjusted:
		Input shaft, refer to INPUT SHAFT, ADJUSTING .	Output shaft, refer to OUTPUT SHAFT, ADJUSTING .	Differential, refer to DIFFERENTIAL, ADJUSTING .
Replaced part:	Transmission housing	x		x
	Clutch housing	x	x	x
	Input shaft	x
	Output shaft		x
	Differential housing			x
	Output shaft tapered roller bearing	x
	Output shaft tapered roller bearing		x
	Differential tapered roller bearing			x
	4th gear	x