LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Off Locking Collar With Synchronizer Hub And Bearing Mount
GWWN35-0325Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock ring -arrow- beforehand.

scientia non olet · About LEMON Manuals