LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing On 3rd And 4th Gear Synchro-Hub With Locking Collar Using Special Tools VW412, VW519, VW402 & VW447H
GWWV35-1147Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals