LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installed Position: Locking Collar/Synchronizer Hub for 1st and 2nd Gears

Installed Position: Locking Collar/Synchronizer Hub for 1st and 2nd Gears

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installation Position Of Locking Collar/Synchro-Hub 1st And 2nd Gear
GWWN35-0284Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The teeth of the locking collar -arrow- point toward the splines of the 3rd/4th gear synchronizer hub -A-.

scientia non olet · About LEMON Manuals