LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Checking 3rd/4th Gear Synchronizing Ring for Wear

Checking 3rd/4th Gear Synchronizing Ring for Wear

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking 4Th Gear Synchro-Ring For Wear
GWWV35-0975Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the synchronizer ring onto the taper of the gear and measure the gap dimension -a- using a feeler gauge.

Gap Dimension -a- Installed Dimension Wear Limit
3rd gear 4th gear 1.0 to 1.7 mm 1.0 to 1.7 mm 0.5 mm
scientia non olet · About LEMON Manuals