LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> R32 >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Gears, Shafts - 5-Speed Manual Transmission 0A4 (As Of 04.2010)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Input Shaft >> Installing the Outer Race/Tapered Roller Bearing

Installing the Outer Race/Tapered Roller Bearing

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing In Tapered Roller Bearing Outer Race
GWWV35-1117Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.


Fig 1: Pressing In Tapered Roller Bearing Outer Race
GWWV35-1124Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install with shim after adjusting input shaft.

scientia non olet · About LEMON Manuals