Shift Mechanism, Adjusting: Function

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

The shift lever must rest in the 3rd/4th gear selector lever gate when the transmission is in neutral.

-- Press the clutch pedal.

-- Move the shift lever several times through all the gears. Pay particular attention to the operation of the reverse gear lock.

-- Should a gear fail to engage smoothly after repeated selection, adjust the shift mechanism again. Refer to SHIFT MECHANISM, ADJUSTING .