Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Component

Fastener Size

Ball Stud to Transmission

Clutch Pedal Bolt Nut ⁽¹⁾

Clutch Pedal Bracket to Bulkhead Nut ⁽¹⁾

Clutch Slave Cylinder to Transmission Bolt

Guide Sleeve to Transmission Bolt

Hose/Line Assembly Bracket to Transmission Bolt

Impact Bolster Support to Steering Column Bracket

-- Secured with two bolts

-- Secured with one bolt

Pressure Plate to Flywheel Bolt

Transmission Support to Transmission Bracket/Transmission Bolt ⁽¹⁾

20 + 90°

⁽¹⁾	Always replace