Tightening Specifications

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Clutch slave cylinder to transmission bolts, see -item 9- in CLUTCH RELEASE MECHANISM OVERVIEW .

Transmission support to transmission bracket and transmission bolts -arrows- :

Fig 1: Identifying Transmission Support And Slave Cylinder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install new bolts.

-- Tighten the bolts hand tight.

-- Tighten the bolts to 20 Nm + 90° (1/4) additional turn.