LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (2.5L - Lubrication - Engine Code(S): BGP, BGQ, CBTA & CBUA (Sedan) (A5 Platform)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Guide Tube to Cylinder Block Bolt (2) - 25
Intake Manifold Support/Guide Tube to Cylinder Block Bolt (3) - 25
Locking Bolt to Cylinder Block - 30
Lower Oil Pan to Upper Oil Pan Bolt - 10
Oil Cooler to Oil Filter Bracket Bolt - 25
Oil Filter Bracket to Cylinder Block Bolt - 25
Oil Filter Housing to Oil Filter Bracket - 25
Oil Intake Pipe to Oil Pump Bolt - 10
Oil Intake Pipe to Upper Oil Pan Bolt - 10
Oil Pan Drain Plug to Lower Oil Pan - 30
Oil Pressure Regulation Valve to Cylinder Block Bolt (2) - 9
Oil Pressure Switch to Cylinder Block (2) - 20
Oil Pressure Switch to Oil Filter Adapter (3) - 20
Oil Pump Align Plate T03005 to Crankshaft Bolt - 30
Oil Pump to Cylinder Block Bolt - 25
Reduced Oil Pressure Sensor to Cylinder Block (2) - 20
Sprocket to Oil Pump Bolt (1) - 20 + 90°
Upper Oil Pan to Cylinder Block Bolt - 25
(1) Always replace
(2) Jetta from MY 11 only
(3) Jetta from MY 05 through 10, Jetta Sport Wagon (US)/Jetta Wagon (Canada) for MY 09 and Jetta Sport Wagon (US)/Golf Wagon (Canada) from MY 10 only