LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Passenger Protection, Airbags, Seat Belts (Sedan) (A5 Platform)) >> 69 Passenger Protection, Airbags, Seat Belts >> Description And Operation >> Passive Occupant Detection System >> After An Accident With Belt TENSIONER And/Or Airbag Deployment

After An Accident With Belt TENSIONER And/Or Airbag Deployment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module -J706- basic setting must be performed. Perform basic setting with a diagnostic tester that has "Guided Fault Finding".

If the seat rails and/or seat pan must be replaced after an accident due to deformation, seat occupied recognition must also be replaced with "seat occupied recognition repair kit". Then, Seat Occupied Recognition Control Module -J706- basic setting must be performed. Perform basic setting with a diagnostic tester that has "Guided Fault Finding".

scientia non olet · About LEMON Manuals