Right Seat Trim

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removal and installation is described for left seat. The same instructions apply for removal and installation for the right seat.

Removal

-- Remove front seat. Refer to FRONT SEAT .

-- Press clamping pin -1- inward and remove securing clip -2-.

-- Pull seat belt latch toward outside.

NOTE:

Belt latch is not depicted in the illustration.

-- Release the retaining hook -3- and remove the trim -4- from the seat.

Fig 1: Identifying Right Seat Trim Remove/Install Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installation

-- To install, perform the steps used for removal in reverse order.