Power Backrest Adjustment Bracket And Lever

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Removal

-- Remove the right trim panel on the seat with power lumbar adjustment. Refer to RIGHT SEAT TRIM PANEL WITH POWER LUMBAR ADJUSTMENT

-- Remove the two bolts -4- (3.5 Nm) and remove operating lever -3-.

-- Remove the two bolts -2- (3.5 Nm) and remove bracket -1-.

Fig 1: Identifying Power Backrest Adjustment Bracket And Lever

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installation

-- To install, perform the steps used for removal in reverse order.